Inventory Unit Detail

2021 MacDon FD145

$160,000.00

$160,000.00

Overview

New/Used Used
Availability In Stock
LocationMeadow Power and Equipment Ltd
Primary ColorBLACK
Stock # MD4855
VIN 48553522
Condition Excellent

Product Features

Dealer Notes
45' Flex-Draper w/ Double Knife Drive,
Split Reel w/ Fore/Aft & Flip Over Kit & Lodged Crop Finger Kit,
12" Upper Cross Auger,
Header Height Sensing,
Poly Skid Shoes,
Integrated Transport,
Cutterbar Poly
Case IH Combine Adapter,
45' Flex-Draper w/ Double Knife Drive
Split Reel w/ Fore/Aft & Flip Over Kit & Lodged Crop Finger Kit
12" Upper Cross Auger
Header Height Sensing
Poly Skid Shoes
Integrated Transport
Cutterbar Poly
Case IH Combine Adapter

Description

NEXT LEVEL CROP RECOVERY PERFORMANCE



Most combine headers perform well in perfect harvesting conditions, but when was the last time you had perfect conditions? MacDon FlexDraper® and Draper Headers are designed to maximize productivity in the most challenging harvesting situations, from our Active Float System that keeps our headers true-to-the-ground, to the outstanding performance of our reel. Available in sizes up to 13.7 m (45'), MacDon combine drapers are built tough to deliver worry-free harvesting performance with any crop, in any condition, and on any combine.

Product Features
  • Active Float System: MacDon's Active Float System reacts instantly to changing ground conditions. This immediate float response means you can cut extremely close to the ground without pushing soil. Two sets of coil springs on the FM100 Float Module support up to 97% of the header weight. The instant float response provides 4.8 degrees of lateral float and 178 mm (7") of vertical float independent of the combine feeder house. MacDon’s Active Float System keeps our headers true to the ground for a clean, even cut every time.
  • Combine Interchangeability: Thanks to the FM100, MacDon Draper Headers are designed to fit on all major brand combines with an easy-to-install completion package. This multi-brand compatibility means your investment will hold its value until it's time to update your header.
  • The MacDon FeedMacX: MacDon's FeedMacX™ system is designed to be custom configured to match any combine's performance capabilities, providing serious capacity, optimized feeding, and incredible productivity. FeedMacX™ components are built smart and tough to provide the performance and reliability MacDon is trusted for. Here's how it works:
  • Capacity: The heart of the FeedMacX™ crop feeding system is the feed auger, featuring combine-tailored speeds, feeding configuration, and aggressive action, resulting in up to 20% more capacity over the previous model. In-feed speed is tailored to match that of your specific combine's feeder chain. Bolt-on components make it possible to configure the auger flighting and number of finger tines to match the combine's feeder house opening. The finger tines are longer and more aggressive. Altogether, the FeedMacX™ system works to optimize the performance of any combine in any crop.
  • Durability: The strength and reliability of the FM100’s feed auger comes from smart innovations and heavy-duty internal components, like the tine shafts that are 25% thicker than the previous model and an all-new reversing clutch that provides positive engagement in either direction. The new finger design protects both the header and the combine from foreign objects. Reconfigured and upgraded, the chain drive tension is externally adjustable and incorporates a positive stop to retain its setting and alignment.
  • High Capacity Hydraulics: MacDon's new hydraulic system features individual fully filtered circuits for the knife drive, side drapers, and feed draper. These individual circuits provide increased side draper speed, along with greater capacity and reliability. The 1 Series hydraulics make it possible for an optional in-cab side draper speed control, allowing on-the-go adjustment.
  • Amazing Reel Performance: Unlike other headers, the movement of our heavy-duty reel picks up and gently places crop onto the drapers. The reel features a uniquely shaped cam, which allows the fingers to get underneath lodged crop and pick it up before it's cut. Along with the header tilt control, which hydraulically angles the knife from the cab, and fore-aft reel positioning, our headers can be adjusted for the toughest harvesting challenges.
  • Active Crop Flow: MacDon's Active Crop Flow gently places crop on the side drapers heads-first and swiftly moves it onto the feed draper, where it's scooped up into the combine's feeder house. Heads-first feeding promotes peak combine efficiency by saving fuel, improving threshing action, creating a better straw distribution, and allowing for a more productive harvest overall. Because this harvesting method is more efficient in damp and moist conditions, you can start earlier and work later into the evening. Part of MacDon's FeedMacX™ system, the side draper speed is increased up to 60% to optimize combine capacity, and an optional in-cab side draper speed control allows on-the-go adjustment.
  • Multi-Crop Harvesting Solution: MacDon’s D1 and FD1 Series headers are true multi-crop headers that are able to take down cereals, oil seeds, beans - just about any crop in any condition. The FD1 FlexDraper® switches easily from flex to a solid frame with the quick flip of a lever, giving you the ultimate flexibility to move from one crop-type to another. Any crop, any condition, MacDon Drapers are the ultimate performance upgrade for your combine.
  • A Consistently Close Shave: MacDon’s patented C-shaped low profile cutterbar design allows ground-level cutting for the most consistently close shave of your fields. Featuring a heavy-duty knife drive and in-cab knife angle control, this cutting system allows you to match any harvest conditions. The ultra-smooth ground-facing surface of our cutterbar helps our headers glide along the ground for a smooth close cut every time.
  • Aggressive Upper Cross Auger: The optional Upper Cross Auger helps to move heavy, bushy, high-volume crops, like canola and peas, to the center of the header for smooth feeding. Featuring twin pitch flighting at the center of the auger to aggressively drive crop down and into the feed auger of MacDon's FeedMacX™ system. Available for all header sizes, the upper cross auger is attached in front of the back tube and features a shut-off valve to disengage the drive when not required.
  • Self-Contained Transport: Our Slow Speed Transport package allows you to tow your D1 and FD1 Series Headers up to 20 mph (32 km/h). This option also adds the advantage of spring-loaded stabilizer wheels. (Always follow local traffic laws and regulations.)
  • FD1 FlexDraper® - Imitated but never duplicated: Featuring MacDon Flex-Float Technology®, FD1 Series FlexDrapers continue to advance harvesting innovation. The flex advantage comes from a fixed reel to cutterbar relationship, which maintains a small gap between the reel fingers and cutterbar, while the Active Float System allows for instant lateral and vertical float response over rolling and uneven terrain. The result of our Flex-Float Technology™ is smooth, consistent, heads-first feeding that significantly boosts combine productivity.
  • Close reel to cutterbar relationship: The MacDon FD1 FlexDraper® features a fixed reel to cutterbar relationship. A small gap between the reel fingers and the cutterbar is maintained at all times, even at extreme flex, ensuring smooth, consistent, heads-first feeding of the crop over the entire width of the FlexDraper®.
  • Active Float System: MacDon's Active Float System reacts instantly to changing ground conditions. This immediate float response means you can cut extremely close to the ground without pushing soil. Two sets of coil springs on the FM100 Float Module support up to 97% of the header weight. The instant float response provides 4.8 degrees of lateral float and 178 mm (7") of vertical float, independent of the combine feeder house. Best of all, this is a simple reliable mechanical system requiring only one sensor, so things won't break down when your harvest is on the line. MacDon’s Active Float System keeps our headers true-to-the-ground for a clean, even cut every time.
  • Reel Performance: Unlike other headers, the movement of our heavy-duty reel picks up and gently places crop onto the drapers. The FD1 reel features 4" finger spacing and a uniquely shaped cam, which allows the fingers to get underneath lodged and low-podding crop to pick it up before it's cut. Along with the header tilt control, which hydraulically angles the knife from the cab and fore-aft reel positioning, our headers can be adjusted for the toughest harvesting challenges.
  • True Ground Following: The MacDon FD1 FlexDraper® is a floating, three-section flexible header with a split reel. This allows the entire header frame, cutterbar, and reel to follow ground contours as a unit, flexing up to 254 mm (10") on either end, while maintaining a close reel to cutterbar relationship. This unique three-section design lets the FD1 FlexDraper® deliver smooth, consistent, head-first feeding to the combine, even at extreme flex.
Specifications
  • Size: 45 ft. (13.7 m)
  • Weight* Double Knife Drive with FM100: 8800 lb. (3992 kg)
  • Knife: Type / Drive / Speed / Guards: Single or double knife / Hydraulic, MacDon design enclosed oil bath wobble box(es) / 1050 to 1400 spm, varies depending on header size / Pointed DHT (double heat-treated), strong, mud resistant profile
  • Reel: Type / Drive / Speed / Fingers: Pick-up reel, 2-piece (double), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm varies depending on combine model / 279 mm (11") length, wear-resistant HD plastic, 102 mm (4") spacing
  • Conveyor: Type / Drive / Speed: 1057 mm (41.6") width, reversible 680.4 g (24 oz) rubber skim-coated drapers, double V-guide with tracking, integral seal on leading edge / Hydraulic / 0 to 194 m/min (0 to 636 ft/min) (Depending on combine model)
  • Standard Features: Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators
  • Field-Installed Options: Upper cross auger, stabilizer wheels, in-cab side draper speed control, slow speed transport, lateral tilt automatic header height control
NOTES:
*All listed weights are approximations and will vary depending on header configuration. Check with your dealer for combine ratings. Weight includes FM100 Combine Adapter. The FM100 Combine Adapter weighs approximately 2400 lb (1089 kg); this number varies by combine model.

General

Width 45 ft. (13.7 m)
Weight 8800 lb. (3992 kg)

Shopping Tools